Radiator Air Vacuum Release Valve , OEM Boiler Air Tank Release
Air Vacuum Release Valve Specifications:
|1||Body & Bonnet||Ductile Iron|
|3||Float Ball||Stainless Steel 304|
|5||Air Release Valve||Assembly|
AIR BLEED VALVE
VALVE DOUBLE BALL 3"
FLAT FACE FLANGE AS PER ASME B16.5
BODY:A105 FORGING/A216 WCB CASTING^TRIM # 5 (FULL HARD FACED) AS
PER API 600/602^OTHER
SEPCS: ANGLE BODY, DISC TYPE, BOLTED BONNET, GRAPHITE STEM PACKING
PRESSURE RATING 125 LBS
Air Vacuum Release Valve Parameters
|Nominal Pressure: 1.0,1.6MPa|
|Work temperature: ≤120℃|
|Design Standard : BS5163|
|Flange Standard : BS EN 1092|
|OTHER STANDARD ARE AVAILABLE UPON REQUEST.|
Flanged end deminsion: according as ISO7005.2 PN16/PN10
|working pressure: 1.0MPa/ 1.6Mpa|
|seal test: 1.1MPa /1.76Mpa|
|strength test: 1.5MPa / 2.4Mpa|
|1, body/bonnet: cast iron/ ductile iron|
|2, floating ball: SS304 / PTFE|
|3, vent: steel, 59# brass|
|4, seal ring: EPDM|
|5, bolt/nut: A3|
Standard ; DIN BS ANSI
Working Pressure : PN10 PN16 PN25
Material : Cast Iron and Ductile Iron
1 ) Size: 1-1/2" to 12"
2 ) Class: PN10, PN16.125LB, 150LB
3 ) Type: NBR Floating Ball, Stainless steel / Brass Spindle
4 ) Material: CAST IRON, DUCTILE IRON
All our products are designed and manufactured strictly in
conformity with the standard of API, ANSI,
AWWA, JIS, BS and DIN, etc. Most of our manufacturers have obtained
ISO 9001, API 6D, TUV and
CE certificates to ensure the quality stability of the products. We
provide EN10204 3.1B. Mill Test
Certificate for all our supplied products.
The air release valves will be installed at sections of the
where air pockets would be formed.
The valves shall be of robust construction of double orifices with
an integral isolating valve and
flanged base for connection to a valve stem that connects the air
valve to the main pipeline.
The bore leading to the flange base shall be in accordance to the
size of the main pipeline and the
expected accumulation of air.
• Coating Powder Epoxy Min. 250 micron
• Three Way Functioning:
- Release of large volumes of air during pipeline fill.
- Allows in flows of large volumes of air when pipe is emptied.
- Release of air under pressure
• Low Maintenance
• Working pressure Min. 0.1 bar Max. 16 bar
• Hydraulic test performed under 1.5xPN pressure
REMARKS & APPLICATIONS
• For water (Not sewage) and neutral liquids.
• Nominal Pressure: PN 16/25 & PN 25/40
• Working Temperature: -10˚C to 120˚C