Shanghai kangquan Valve Co. Ltd.
Shanghai KangQuan Valve Co. Ltd. Best Resilient Seated Gate Valve Supplier
Add to Cart
OEM Brand Ball Valve, Full Bore, Body / Ball: Stainless Steel CF8M (SS316), Threaded End To BS 21
| OEM brand ball valve, full bore |
| body : Stainless steel CF8M ( SS 316) |
| ball : Stainless steel CF8M ( SS 316) |
| shaft: Stainless steel 316 |
| seats: PTFE |
| operation: with Stainless steel lever |
| internal fastenings: Stainless steel 316 (A4) |
| working pressure : 16 bar at max. 40 deg. C |
| seat leakage: no visible leakage as specified in EN 12266-1 |
| application : lime solution or alum solution |
| Threaded endsd to BS 21 |
Brief introduction:
The ball valve is designed and manufactured according well to API 6D. Floating ball when small
caliber, and fixed ball when large caliber. It has fire protection structure and antistatic device.
Widely used for petroleum,chemistry,water treatment industries.
Main part & material
| Part name | Material |
| body | WCB,ZG1Cr18Ni9Ti,CF8 |
| ball | 1Cr18Ni9Ti 304,316 |
| stem | 1Cr18Ni9Ti 304,316 |
| seal ring | Polytetrafluoroethlene(PTFE) |
| packing | Polytetrafluoroethlene(PTFE) |
| DN | G | B | L | H | A |
| 6 | 1/4" | 8 | 65 | 57 | 98 |
| 10 | 3/8" | 10 | 65 | 57 | 98 |
| 15 | 1/2" | 15 | 75 | 68 | 125 |
| 20 | 3/4" | 20 | 85 | 70 | 125 |
| 25 | 1" | 25 | 95 | 80 | 145 |
| 32 | 1-1/4" | 32 | 110 | 84 | 145 |
| 40 | 1-1/2" | 38 | 125 | 93 | 205 |
| 50 | 2" | 50 | 150 | 100 | 205 |
| 65 | 2-1/2" | 64 | 175 | 142 | 250 |
| 80 | 3" | 76 | 216 | 155 | 265 |
| 100 | 4” | 100 | 260 | 172 | 300 |
Technical Specification
| Nominal pressure(Mpa) | PN | 2.5,4.0,6.4 |
| Strength testing pressure(Mpa) | PT | 3.8,6.0,9.6 |
| Low pressure seal test(Mpa) |
| 0.6 |
| High pressure seal test(Mpa) |
| 3.0,4.8,7.6 |
| Applicable medium | water, oil, gas, nitric acid, acetic acid | |
| Applicable temperature | -40～180℃ | |
Feature:
- Anti-blowout Structure of Valve Stem
When medium pass through the valve, the pressure in valve body may possibly
push the stem out, or when the valve is in repair, if there is pressure in the middle
cavity, the stem or medium seems to easily fly out upon disassembling the valve,
which can cause injures to human beings,
To prevent the possibilities, a dummy club is packing and thrust bearing are burnt
or packing is damaged due to other causes, the pressure of medium in valve body
will make the dummy club of valve stem in close contact with the upper seal face of
valve body.
Thus to prevent medium leaking out from the damage packing position.
- Reliable Seal Structure
The seat is made of PTFE. Because the contact area between seat and the ball will
becomes more high with rising of pressure of the middle cavity,
Small Resistance ball valve has the smallest resistance of all the valve, in the case
of reduced bore, the resistance is little still.
- Prompt switch
The ball valve circumrotates in 90°,It work quickly to open or close.
Specifications:
Technical Specification
- Nominal diameter: 1/2”-25”
- Applicable Temperature: -29℃～425℃(steel) -40℃～550℃(stainless steel)
- Nominal pressure: 150lbs, 300lbs, 600Lb,900lbs,1500lbs PN16/25/40/64/100/160, JIS 5K /10K/20K
- Applicable Medium: water ,gas,oil,and other causticity medium.
Applications Standard
- Manufacture standard : API 608/ DIN/ BS/JIS
- Face to face dimension: ANSI B 16.10,API 6D/ DIN/ BS/JIS
- Flange dimension: ANSI B 16.5 MSS-SP-44/ DIN/ BS/JIS
- Test: API 598 API 6D/ DIN/ BS/JIS
Description:
Brief introduction:
The ball valve is designed and manufactured according well to API 608. Floating ball when small caliber,
and fixed ball when large caliber.
It has fire protection structure and antistatic device. Widely used for petroleum, chemistry, water
treatment industries.
Features:
- Anti-blowout Structure of Valve Stem
When medium pass through the valve, the pressure in valve body may possibly push the stem out, or
when the valve is in repair, if there is pressure in the middle cavity, the stem or medium seems to easily
fly out upon disassembling the valve, which can cause injures to human beings, To prevent the
possibilities, a dummy club is packing and thrust bearing are burnt or packing is damaged due to other
causes, the pressure of medium in valve body will make the dummy club of valve stem in close contact
with the upper seal face of valve body. Thus to prevent medium leaking out from the damage packing
position.
- Reliable Seal Structure
The seat is made of PTFE. Because the contact area between seat and the ball will becomes more high
with rising of pressure of the middle cavity, Small Resistance ball valve has the smallest resistance of all
the valve, in the case of reduced bore, the resistance is little still.
-Prompt switch
The ball valve circumrotates in 90°,It work quickly to open or close.