Double / Bleed Floating Ball Valve Stainless Steel DBB FLG AISI 316 PTFE

Double / Bleed Floating Ball Valve Stainless Steel DBB FLG AISI 316 PTFE

DBB flg; Body: ASTM A182-F316; Trim: AISI 316, filled PTFE

if you need more information, please kindly contact with us.

BALL VALVE:

W.N.R.F. Flanged Ball Valves, Full bore, lever operated, ANSI Class 150/300. Dimensions API 6D and, tests to API with following parameters:

Body Material : ASTM A216 WCB

Ball and Trim Material : Stainless Steel

Lever Material : Forged steel with Zn coated

Seat Material : PTFE

Working Temperature : 05°C to 50°C

Working Pressure : 150 Psig./350 Psig.

Fluid to be handled : Natural Gas

(Odorized) containing 0.5% CO2 by volume.

Technical Specification

- Nominal diameter: 1/2”-25”

- Applicable Temperature: -29℃～425℃(steel) -40℃～550℃(stainless steel)

- Nominal pressure: 150lbs, 300lbs, 600Lb,900lbs,1500lbs PN16/25/40/64/100/160, JIS 5K /10K/20K

- Applicable Medium: water ,gas,oil,and other causticity medium.

Applications Standard

- Manufacture standard : API 608/ DIN/ BS/JIS

- Face to face dimension: ANSI B 16.10,API 6D/ DIN/ BS/JIS

- Flange dimension: ANSI B 16.5 MSS-SP-44/ DIN/ BS/JIS

- Test: API 598 API 6D/ DIN/ BS/JIS

Description:

The ball valve is designed and manufactured according well to API 608. Floating ball when small caliber,

and fixed ball when large caliber.

It has fire protection structure and antistatic device. Widely used for petroleum, chemistry, water

treatment industries.

Features:

- Anti-blowout Structure of Valve Stem

When medium pass through the valve, the pressure in valve body may possibly push the stem out, or

when the valve is in repair, if there is pressure in the middle cavity, the stem or medium seems to easily

fly out upon disassembling the valve, which can cause injures to human beings, To prevent the

possibilities, a dummy club is packing and thrust bearing are burnt or packing is damaged due to other

causes, the pressure of medium in valve body will make the dummy club of valve stem in close contact

with the upper seal face of valve body. Thus to prevent medium leaking out from the damage packing

position.

- Reliable Seal Structure

The seat is made of PTFE. Because the contact area between seat and the ball will becomes more high

with rising of pressure of the middle cavity, Small Resistance ball valve has the smallest resistance of all

the valve, in the case of reduced bore, the resistance is little still.

-Prompt switch

The ball valve circumrotates in 90°,It work quickly to open or close.